• English
    • English
    • Deutsch
    • Français
    • Español
    • Português
    • Italiano
    • Türkçe
    • Русский
    • 中文
    • 日本語
    • 한국어
Logo: AutoForm Engineering Logo: AutoForm Engineering
  • Topics
    • Sheet Metal Forming Process Chain

      • Part Feasibility
        • Quick Forming Check
        • Simultaneous Engineering
      • Planning & Bidding
        • Process Planning
        • Strip Layouts
        • Material Utilization
        • Tool Cost Estimation
        • Part Cost Estimation
      • Process Engineering
        • Concept Die Faces
        • Full Cycle Simulation
        • Springback Minimization
        • Trim Line Optimization
        • Systematic Process Improvement
        • Robust Springback Compensation
        • Tribology System Optimization
        • CAD-Quality Die Faces
        • Surface Defects Avoidance
        • Final Validation
      • Tool Tryout
        • Simulation Based Tryout Support
        • Tryout Loop Reduction
      • Part Production
        • Predictive Maintenance
        • Process Robustness
        • Continuous Improvement

      Technologies

      • Line/Transfer Die Stamping
      • Progressive Die Stamping
      • Aluminum Stamping
      • High-Strength Steel Stamping
      • Hot Forming
      • Hemming
      • Tube Hydroforming
  • Topics
    Topics
    • Sheet Metal Forming Process Chain
      Sheet Metal Forming Process Chain
      • Part Feasibility
        Part Feasibility
        • Quick Forming Check
        • Simultaneous Engineering
      • Planning & Bidding
        Planning & Bidding
        • Process Planning
        • Strip Layouts
        • Material Utilization
        • Tool Cost Estimation
        • Part Cost Estimation
      • Process Engineering
        Process Engineering
        • Concept Die Faces
        • Full Cycle Simulation
        • Springback Minimization
        • Trim Line Optimization
        • Systematic Process Improvement
        • Robust Springback Compensation
        • Tribology System Optimization
        • CAD-Quality Die Faces
        • Surface Defects Avoidance
        • Final Validation
      • Tool Tryout
        Tool Tryout
        • Simulation Based Tryout Support
        • Tryout Loop Reduction
      • Part Production
        Part Production
        • Predictive Maintenance
        • Process Robustness
        • Continuous Improvement
    • Technologies
      Technologies
      • Line/Transfer Die Stamping
      • Progressive Die Stamping
      • Aluminum Stamping
      • High-Strength Steel Stamping
      • Hot Forming
      • Hemming
      • Tube Hydroforming
  • Products
    Products
    • AutoForm Forming
      AutoForm Forming
      • AutoForm-StampingAdviser
      • AutoForm-Explorer
      • AutoForm-Sigma
      • AutoForm-TryoutAssistant
      • AutoForm-DieDesigner
      • AutoForm-HemPlanner
      • AutoForm-Compensator
      • AutoForm-CostEstimator
      • AutoForm-DieAdviser
      • AutoForm-FormingSolver
        AutoForm-FormingSolver
        • AutoForm-Thermo Plug-In
        • AutoForm-PhaseChange Plug-In
        • TriboForm Plug-In
      • AutoForm-Trim
    • AutoForm TubeXpert
    • Logopress
    • CAD-Embedded Modules
      CAD-Embedded Modules
      • AutoForm-OneStepforCATIA
      • AutoForm-ProcessDesignerforCATIA
      • AutoForm-QuickLinkforCATIA
      • AutoForm-QuickLinkforNX
    • TriboForm
    • Cloud Offerings
      Cloud Offerings
      • AutoForm in the Cloud
      • EasyBlank® Cloud
    • Licensing Alternatives
  • Products
    Products
    • AutoForm Forming
      AutoForm Forming
      • AutoForm-StampingAdviser
      • AutoForm-Explorer
      • AutoForm-Sigma
      • AutoForm-TryoutAssistant
      • AutoForm-DieDesigner
      • AutoForm-HemPlanner
      • AutoForm-Compensator
      • AutoForm-CostEstimator
      • AutoForm-DieAdviser
      • AutoForm-FormingSolver
        AutoForm-FormingSolver
        • AutoForm-Thermo Plug-In
        • AutoForm-PhaseChange Plug-In
        • TriboForm Plug-In
      • AutoForm-Trim
    • AutoForm TubeXpert
    • Logopress
    • CAD-Embedded Modules
      CAD-Embedded Modules
      • AutoForm-OneStepforCATIA
      • AutoForm-ProcessDesignerforCATIA
      • AutoForm-QuickLinkforCATIA
      • AutoForm-QuickLinkforNX
    • TriboForm
    • Cloud Offerings
      Cloud Offerings
      • AutoForm in the Cloud
      • EasyBlank® Cloud
    • Licensing Alternatives
  • Services
    Services
    • Support
    • Material Databases
    • Software Certificates
    • Trainings
      Trainings
      • Trainings Certification
      • Update Trainings
        Update Trainings
        • AutoForm-ProcessDesignerforCATIA R9
        • AutoForm TubeXpert R9
      • Base Trainings
        Base Trainings
        • Part Design
        • Feasibility Assessment
        • Planning & Bidding
        • Process Engineering I & II
        • Process Validation
        • Progressive Dies
        • Process Design I & II
        • Tryout Support
        • Tube Forming
      • Advanced Trainings
        Advanced Trainings
        • Reporting
        • Postprocessing
        • Springback I
        • Springback II
        • Die Face Development
        • Hot Forming
        • Hemming
        • Friction Modeling
        • Robust Process Improvement
        • Compensation Design
        • Relief Design
      • Fundamental Trainings
        Fundamental Trainings
        • Stamping / Deep Drawing
        • Draw Die Development
        • Material Behavior in Sheet Metal Forming
        • Material Behavior in Hot Stamping
      • Customized Trainings
      • Training Dates
      • Training Registration
  • Newsroom
    Newsroom
    • News
      News
      • Archive
    • Publications
      Publications
      • Archive
    • Events
  • About Us
    About Us
    • Who We Are
    • Executive Board
    • Team
    • Customers
    • Testimonials
    • Innovations
    • Commitment
    • Careers
    • Contact
    • English
    • Deutsch
    • Français
    • Español
    • Português
    • Italiano
    • Türkçe
    • Русский
    • 中文
    • 日本語
    • 한국어
  1. Home
  2. Newsroom
  3. News
  • News
    • Archive
  • Publications
    • Archive
  • Events
SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool
  02-09-2020
  Press Releases

SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool SOLIDReporter for SOLIDWORKS – Time and Project Management Tool

Logopress, a long-time SOLIDWORKS® software partner, announces the launch of a new add-in product called SOLIDReporter™ which has been developed for all SOLIDWORKS users. SOLIDReporter™ is an easy-to-use and affordable add-in designed to work...

AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO
  01-16-2020
  Press Releases

AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO AutoForm Appoints New CEO

AutoForm Engineering GmbH is pleased to announce that Olivier Leteurtre has been appointed Chief Executive Officer of the AutoForm Group. Dr. Waldemar Kubli, Founder and former CEO will now take up the role of Chief Product Officer. He will continue...

COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down
  10-07-2019
  Press Releases

COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down COO of AutoForm Decided to Step Down

AutoForm Engineering GmbH, the leading supplier of software solutions for the sheet metal forming industry, regrets to announce the resignation of Dr. Detlef Schneider as the company’s Chief Operating Officer.

AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming
  09-24-2019
  Press Releases

AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming AutoForm TubeXpert R8 – Unique Software Solution for Experts in Tube Bending, Forming and Hydroforming

AutoForm Engineering GmbH, the leading supplier of software solutions for the sheet and tube metal forming industry, has unveiled AutoForm TubeXpert R8. Building on the success of AutoForm Hydro 2016, this new software solution provides extensive...

AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud
  08-27-2019
  Press Releases

AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud AutoForm in the Cloud

AutoForm Engineering GmbH announces a new service, AutoForm in the Cloud. Both long-standing as well as new customers now have flexible, browser-based access to AutoForm technology.

AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO
  05-21-2019
  Press Releases

AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO AutoForm Appoints New CFO

AutoForm Engineering GmbH, the leading supplier of software solutions for the sheet metal forming industry, has appointed Christian Burgherr as the new Group CFO. In this position at AutoForm, he is responsible for the management of AutoForm’s...

TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation
  04-16-2019
  Press Releases

TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation TriboForm R3.1 – A New Dimension in Sheet Metal Forming Simulation

TriboForm Engineering has unveiled its latest software version TriboForm 3.1. This new software version offers important new enhancements and allows for even more realistic consideration of tribological effects. TriboForm’s expertise in the field of...

AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai
  03-14-2019
  Press Releases

AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai AutoForm Expands Presence in Asia with New Office in Shanghai

AutoForm Engineering GmbH has opened a new subsidiary office in Shanghai. This new office enables AutoForm to be closer to the fast growing Chinese market in order to better serve customers with the full range of AutoForm’s products and services.

Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World
  02-14-2019
  Press Releases

Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World Reaching the 1000th Company to have Introduced AutoForm all over the World

The 1000th company to introduce AutoForm is Toyoda Iron Works Co., Ltd. in Japan

AutoForm Engineering GmbH announces that the number of companies in the world, to have introduced AutoForm software has reached the 1000 mark. This notable 1000th...

AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain
  01-17-2019
  Press Releases

AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain AutoForm R8 – Streamlined Digital Process Chain

AutoForm Engineering GmbH has unveiled its latest software version AutoForm R8. This release brings new features and important enhancements to support customers in streamlining the digital process chain. It is particularly beneficial for users...

  • 1
  • 2
  • 3
  • Next
  • CONTACT
  • IMPRINT
  • LEGAL
  • PRIVACY POLICY
  • SITEMAP
  • GLOSSARY
  • BLOG
  • Contact

Customer Service
+41 43 444 6161