AutoForm Training Seminars:
Simulation of Forming Operations
Up to now, many users considered only the deep drawing process
during simulation. However, it is also important to consider
secondary operations. They have to be analyzed for an absolutely
reliable process layout. With such practice, not only splits and
wrinkles are avoided, but, in addition, the tryout process of
the trim dies can be reduced.
This training is specially addressed to the requirements of the
simulation of secondary operations for both the generation of tool
geometries in AutoForm-DieDesigner and the correct selection of
the element formulation in the Process generator. The computation
time for the secondary operations can be kept comparatively short
by means of the skilled application of the function Restart. Finally,
some special characteristics of the evaluation of the secondary
operations are introduced.
Main focus of the training is:
 |
Automatic tool generation for secondary operations in AutoForm-DieDesigner |
|
Representation of complex tool kinematics |
|
Effective application of the implemented element types BEM and EPS |
|
Restart functionality |
|
Rapid automatic determination of the optimal trim contour or the optimal sheared blank |
|
Special simulation evaluation for secondary operations due to non linear strain paths |
The training can also be used to brush-up on existing AutoForm knowledge
and skills – acquired e.g. during update trainings – for
the intensive application of the simulation of all operations.
Products
|
AutoForm-DieDesigner |
|
AutoForm-Incremental |
|
AutoForm-Trim |
Audience
This two-day training is intended for process engineers and tool
designers with a basic knowledge of AutoForm-DieDesigner and AutoForm-Incremental.
|
USA: Simulation of Forming Operations – 2008
|
|
Trainings to be scheduled upon request. Please contact your
local AutoForm office to schedule a session, or send
us your filled in request for quotation.
[pdf - 55 KB]
AutoForm Engineering USA, Inc.
Attn: Eric Kam
560 Kirts Blvd, Suite 113
Troy, Michigan 48084-4141
Tel |
+1 888 428 8636 x106 |
Fax |
+1 888 528 8636 |
|
|
|
|
|
Italy: Simulation of Forming Operations – 2008
|
|
Trainings to be scheduled upon request. Please contact your local
AutoForm office to schedule a session, or send us your filled in
request for quotation.
[pdf - 58 KB]
[pdf - 58 KB, Italian]
AutoForm Engineering Italy S.r.l.
Attn: Caterina Battaglio
Via Guido Rossa, 3
I-10024 Moncalieri (TO)
Tel |
+39 011 620 41 11 |
Fax |
+39 011 620 41 90 |
|
|
|
|
|
France: Simulation of Forming Operations – 2008
|
|
Trainings to be scheduled upon request. Please contact your local
AutoForm office to schedule a session, or send us your filled in
request for quotation.
[pdf - 58 KB]
[pdf - 58 KB, French]
AutoForm Engineering France SARL
Attn: Fabienne Rouillier
Les Jardins de la Duranne - Bâtiment C
510 rue René Descartes
F-13857 Aix-en-Provence Cedex 3
Tel |
+33 4 42 90 42 60 |
Fax |
+33 4 42 90 42 62 |
|
|
|
|
|
Korea: Simulation of Forming Operations – 2008
|
|
Location:
Seoul
|
|
Duration:
2 days
|
Dates: |
|
March 27 - 28, 2008 |
|
June 26 - 27, 2008 |
|
September 25 - 26, 2008 |
|
December 11 - 12, 2008 |
|
|
Request for Quotation
[pdf - 62 KB]
|
|
Location / Map
[pdf - 195 KB]
|
|
AutoForm Engineering Korea Ltd.
Attn: Byung-Sik Kim
#404 Byucksan/Kyungin Digital Valley II
Gasandong 481-10, Geumcheongu
Seoul 153-803
Tel |
+82 2 2113 0770 |
Fax |
+82 2 2113 0771 |
|
|
|
|
|
Other Countries: Simulation of Forming Operations – 2008
|
|
Trainings to be scheduled upon request. Please contact your AutoForm team
to schedule a session. For further contact details please take a look at
our page Contact.
|
|
 |
